2024
Buchbeitrag
Numerical and experimental analysis of elastic three-layer plate under static and low velocity impact loading
Altenbach, Holm; Breslavsky, Dmytro; Konkin, Stanislav; Lysenko, Volodymyr; Naumenko, Konstantin
In: Progress in Structural Mechanics , 1st ed. 2024. - Cham : Springer International Publishing ; Altenbach, Holm, S. 1-18 - ( Advanced structured materials book series; volume 199)
Buchbeitrag
The impact of mesh generation in finite element simulations on stress gradient and calculated fatigue strength
Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin
In: Collaborative Research Advancing Engineering Solutions for Real-World Challenges , 1st ed. 2024. - Cham : Springer Nature Switzerland ; Öchsner, Andreas, S. 111-121
Buchbeitrag
Notch effect under cyclic loading of electrical steel strips
Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin
In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 377-400 - (Advanced structured materials; volume 203)
Begutachteter Zeitschriftenartikel
M-integral for finite anti-plane shear of a nonlinear elastic matrix with rigid inclusions
Eremeyev, Victor A.; Naumenko, Konstantin
In: International journal of engineering science - New York, NY [u.a.] : Science Direct, Bd. 196 (2024), Artikel 104009, insges. 14 S.
Buchbeitrag
On the ways to numerically implement the two-time-scale approach
Knape, Katharina; Altenbach, Holm
In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 401-412 - (Advanced structured materials; volume 203)
Buchbeitrag
Continuum mechanics - material independent and dependent equations
Altenbach, Holm
In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 3-24 - (Advanced structured materials; volume 203)
Buchbeitrag
Reviewing yield criteria in plasticity theory
Altenbach, Holm; Kolupaev, Vladimir A.
In: Progress in Structural Mechanics , 1st ed. 2024. - Cham : Springer International Publishing ; Altenbach, Holm, S. 19-106 - ( Advanced structured materials book series; volume 199)
Begutachteter Zeitschriftenartikel
Numerical modelling of the thermoforming behaviour of thermoplastic honeycomb composite sandwich laminates
Minupala, Varun Kumar; Zscheyge, Matthias; Glaesser, Thomas; Feldmann, Maik; Altenbach, Holm
In: Polymers - Basel : MDPI, Bd. 16 (2024), Heft 5, Artikel 594, insges. 14 S.
Begutachteter Zeitschriftenartikel
Plane crack problems within strain gradient elasticity and mixed finite element implementation
Chirkov, Aleksandr Yu; Nazarenko, Lidiia; Altenbach, Holm
In: Computational mechanics - Berlin : Springer . - 2024, insges. 19 S. [Online first]
Begutachteter Zeitschriftenartikel
NUMERICAL MODELING OF HIDDEN DAMAGE ACCUMULATION DUE TO RADIATION EXPOSURE AND HYDROGEN EMBRITTLEMENT
Breslavsky, Dmytro; Tatarinova, Oksana; Tolstolutska, Galyna; Altenbach, Holm
In: Problems of Atomic Science and Technology, S. 3-14
Begutachteter Zeitschriftenartikel
Elasto-plasticity theory for large plastic deformation and its use for the material stiffness determination
Weber, Martin; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer . - 2024 [Online first]
Begutachteter Zeitschriftenartikel
Numerical modeling of Hidden damage accumulation due to radiation exposure and hydrogen embrittlement
Breslavsky, Dmytro; Tatarinova, Oksana; Tolstolutska, Galyna; Altenbach, Holm
In: Voprosy atomnoj nauki i techniki - Char'kov : [Verlag nicht ermittelbar], Bd. 2 (2024), Heft 150, S. 3-14
Begutachteter Zeitschriftenartikel
Interplay of surface and bulk elasticity in morphological stability of ultra-thin film coatings
Shuvalov, Gleb; Kostyrko, Sergey; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer . - 2024, S. 1-21 [Online first]
Begutachteter Zeitschriftenartikel
Variable thermal conductivity in context of Green‐Naghdi theory of thermo‐microstretch solids
Ailawalia, Praveen; Marin, Marin; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH . - 2024, insges. 16 S. [Online first]
Herausgeberschaft
Lectures Notes on Advanced Structured Materials 2
Altenbach, Holm; Hitzler, Leonard; Johlitz, Michael; Merkel, Markus; Öchsner, Andreas
In: Cham: Springer International Publishing AG, 2024, 1 Online Ressource - (Advanced Structured Materials Series; volume 203), ISBN: 978-3-031-49043-9
Herausgeberschaft
Progress in structural mechanics
Altenbach, Holm; Hohe, Jörg; Mittelstedt, Christian
In: Cham: Springer, 2024., 1 Online-Ressource (XX, 304 Seiten) - (Advanced Structured Materials; Volume 199), ISBN: 978-3-031-45554-4 [Literaturangaben]
2023
Buchbeitrag
Fortgeschrittene Methoden für die Schädigungsanalyse von Glaslaminaten bei dynamischen Beanspruchungen
Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Riedel, Kristin; Würkner, Mathias
In: Glasbau ... ; 2023 - Berlin : Ernst & Sohn ; Weller, Bernhard *195X-*, S. 335-347
Buchbeitrag
Development of a microstructure-based finite element model of thermomechanical Response of a fully metallic composite phase change material
Gariboldi, Elisabetta; Molteni, Matteo; Vargas Vargas, Diego André; Naumenko, Konstantin
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 131-142 - (Advanced structured materials; volume 194)
Buchbeitrag
Various state-of-the-art methods for creep evaluation of power plant components in a wide load and temperature range
Blum, Eike; Kostenko, Yevgen; Naumenko, Konstantin
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 69-82 - (Advanced structured materials; volume 194)
Buchbeitrag
Creep mechanics - some historical remarks and new trends
Altenbach, Holm; Eisenträger, Johanna; Knape, Katharina; Naumenko, Konstantin
In: Creep in Structures VI , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 57-68 - (Advanced structured materials; volume 194)
Begutachteter Zeitschriftenartikel
A penalty method for coupling of finite-element and peridynamic models
Pernatii, Anna; Gabbert, Ulrich; Naumenko, Konstantin; Hesse, Jan-Timo; Willberg, Christian
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 22 (2023), Heft 1, Artikel e202200151, insges. 6 S.
Begutachteter Zeitschriftenartikel
Closed-form series solutions to peridynamic rod equations - influence of kernel function
Naumenko, Konstantin; Yang, Zhenghoa; Ma, Chien-Ching; Chen, Yanguang
In: Technische Mechanik - Magdeburg : Inst., Bd. 43 (2023), Heft 2, S. 259-270
Begutachteter Zeitschriftenartikel
Closed-form analytical solutions for the deflection of elastic beams in a peridynamic framework
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Chen, Yang
In: Applied Sciences - Basel : MDPI, Bd. 13 (2023), Heft 18, Artikel 10025, insges. 20 S.
Begutachteter Zeitschriftenartikel
Peridynamic analysis of curved elastic beams
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: European journal of mechanics / A - Paris : Elsevier, Bd. 101 (2023), Artikel 105075
Herausgeberschaft
Creep in Structures VI - IUTAM Symposium Proceedings
Altenbach, Holm; Naumenko, Konstantin
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XX, 334 p. 184 illus., 143 illus. in color.) - (Advanced Structured Materials; 194), ISBN: 978-3-031-39070-8
Lehrbuch
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: [Heidelberg]: Springer Vieweg, 2023, 1 Online-Ressource (xvi, 581 Seiten, 174 Abb., 53 Abb. in Farbe), ISBN: 978-3-662-68391-0
Artikel in Zeitschrift
Young's modulus of the different crystalline phases of poly (L-lactic acid)
Jariyavidyanont, Katalee; Yu, Qiang; Petzold, Albrecht; Thurn-Albrecht, Thomas; Glüge, Rainer; Altenbach, Holm; Androsch, René
In: Journal of the mechanical behavior of biomedical materials - Amsterdam [u.a.] : Elsevier, Bd. 137 (2023), S. 1-11, Artikel 105546
Buchbeitrag
A constitutive model for non-linear basic creep of plain concrete
Eisenträger, Johanna; Altenbach, Holm
In: Advances in Linear and Nonlinear Continuum and Structural Mechanics , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 135-154 - (Advanced structured materials book series; volume 198)
Buchbeitrag
Rheological modeling - historical remarks and actual trends in solid mechanics
Altenbach, Holm
In: Advances in mechanics of time-dependent materials - Cham: Springer Nature; Altenbach, Holm . - 2023, S. 1-16 - (Advanced structured materials; volume 188)
Buchbeitrag
A brief review of the development of mechanics in the National Academy of Sciences of Ukraine
Altenbach, Holm; Bogdanov, Viacheslav; Bulat, Anatolii; Guz, Aleksander N.; Nazarenko, Vladimir M.
In: Advances in mechanics ; Guz, Aleksander N. . - 2023, S. 1-19 - ( Advanced structured materials$xl191)
Buchbeitrag
Creep-damage processes in cyclic loaded double walled structures
Altenbach, Holm; Breslavsky, Dmytro; Tatarinova, Oksana
In: Creep in Structures VI , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 19-56 - (Advanced structured materials; volume 194)
Buchbeitrag
On the general strategies to formulate shell and plate theories
Altenbach, Holm; Eremeyev, Victor A.
In: Progress in continuum mechanics ; Altenbach, Holm . - 2023, S. 37-46 - ( Advanced Structured Materials; 196)
Buchbeitrag
Preface
Altenbach, Holm; Ganczarski, Artur
In: Advanced theories for deformation, damage and failure in materials - Springer Cham; Altenbach, Holm *1956-* . - 2023, S. v-vi - ( CISM international centre for mechanical sciences; volume 605)
Buchbeitrag
Application of nonlinear viscoelastic material models for the shrinkage and warpage analysis of blow molded parts
Michels, Patrick; Dresbach, Christian; Dorp, Esther Ramakers-van; Altenbach, Holm; Bruch, Olaf
In: Creep in Structures VI , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 205-232 - (Advanced structured materials; volume 194)
Buchbeitrag
Creep and damage of materials at elevated temperatures
Altenbach, Holm
In: Advanced theories for deformation, damage and failure in materials - Springer Cham ; Altenbach, Holm *1956-* . - 2023, S. 1-62 - (CISM International Centre for Mechanical Sciences; 605)
Buchbeitrag
Fast fracture of conic shell under the action of belt explosive charge
Altenbach, Holm; Breslavsky, Dmytro; Chernobryvko, Marina; Senko, Alyona; Tatarinova, Oksana
In: Konferenz: 14th International Conference on Advanced Mechanical and Power Engineering, CAMPE 2021, Kharkiv, Ukraine, October 18-21, 2021, Advances in Mechanical and Power Engineering - selected papers from The International Conference on Advanced Mechanical and Power Engineering (CAMPE 2021), October 18-21, 2021 - Cham: Springer Nature Switzerland AG; Altenbach, Holm *1956-* . - 2023, S. 366-376
Begutachteter Zeitschriftenartikel
Coupled problems of gradient thermoelasticity for periodic structures
Lurie, S.A.; Volkov-Bogorodskii, D.; Altenbach, Holm; Belov, P.A.; Nazarenko, Lidiia
In: Archive of applied mechanics - Berlin : Springer, Bd. 93 (2023), Heft 1, S. 23-39
Begutachteter Zeitschriftenartikel
Modeling of SI engine modification for higher ethanol blended gasoline engine applications - Part I - Parametric study using port flow simulation
Amare Zeru, Balewgize; Ramayya, Venkata A.; Altenbach, Holm
In: Ethiopian Journal Applied Sciences and Technology - Jimma : Jimma University . - 2023, Heft Special issue 2, S. 42-50
Begutachteter Zeitschriftenartikel
A fatigue lifetime prediction model for aluminum bonding wires
Moers, Cassandra; Dresbach, Christian; Altenbach, Holm
In: Metals - Basel : MDPI, Bd. 13 (2023), Heft 10, Artikel 1781, insges. 18 S.
Begutachteter Zeitschriftenartikel
Diffusion mechanisms of convective instability in liquid and gas mixtures
Kossov, Vladimir; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 11, Artikel e202300801, insges. 12 S.
Begutachteter Zeitschriftenartikel
Size effects in numerical homogenization of polycrystalline silicon
Weber, Martin; Aßmus, Marcus; Glüge, Rainer; Zabiensky, Max; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH . - 2023, Artikel e202300221, insges. 8 S.
Begutachteter Zeitschriftenartikel
Interaction among interfacial offset cracks in composite materials under the anti-plane shear loading
Tanwar, Anshika; Das, Subir; Craciun, Eduard-Marius; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 11, Artikel e20230081, insges. 15 S.
Begutachteter Zeitschriftenartikel
Thermally stressed thermoelectric microbeam supported by Winkler foundation via the modified Moore-Gibson-Thompson thermoelasticity theory
Abouelregal, Ahmed E.; Marin, Marin; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH . - 2023, Artikel e202300079
Begutachteter Zeitschriftenartikel
Linear theory of micropolar media with internal nonlocal potential interactions
Shorkin, Vladimir S.; Vilchevskaya, Elena N.; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 11, Artikel e202300099, insges. 27 S.
Begutachteter Zeitschriftenartikel
Analysis and modeling of semi-open thermoplastic honeycomb core structures for mechanical simulation with representative volume elements
Rusch, H.; Horn, A.; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2023), Heft 2, S. 381-392
Begutachteter Zeitschriftenartikel
Solving some problems of crack mechanics for a normal edge crack in orthotropic solid within the cohesive zone model approach
Selivanov, M.; Bogdanov, V.; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2023), Heft 2, S. 335-362
Begutachteter Zeitschriftenartikel
From the editorial board of the journal mechanics of composite materials
Altenbach, Holm; Cate, Andris
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2023), Heft 2, S. 171-172
Begutachteter Zeitschriftenartikel
Fracture analysis of inhomogeneous arch with two longitudinal cracks under non-linear creep
Rizov, Victor I.; Altenbach, Holm
In: Advances in materials research - Daejeon : Techno-Press, Bd. 12 (2023), Heft 1, S. 15-29
Begutachteter Zeitschriftenartikel
Modelling and simulation of the hardness profile and its effect on the stress-strain behaviour of punched electrical steel sheets - Modellierung und Simulation des Härteprofils und dessen Einfluss auf das Spannungs-Dehnungs-Verhalten gestanzter Elektrobleche
Kubaschinski, Paul; Gottwalt-Baruth, A.; Tetzlaff, U.; Altenbach, Holm; Waltz, M.
In: Materials science and engineering technology - Weinheim : Wiley-VCH, Bd. 54 (2023), Heft 4, S. 512-526
Begutachteter Zeitschriftenartikel
Preface
Öchsener, Andreas; Altenbach, Holm
In: Materials science and engineering technology - Weinheim : Wiley-VCH, Bd. 54 (2023), Heft 4, S. 369-370
Begutachteter Zeitschriftenartikel
Delamination of multilayered beams with non-linear viscoelastic behaviour under strains of step-like varying velocity
Rizov, Victor; Altenbach, Holm
In: Journal of theoretical and applied mechanics - Warsaw : Versita, Bd. 53 (2023), Heft 2, S. 99-115
Begutachteter Zeitschriftenartikel
Stress-strain state and wear modelling for fuel rod-grid contact
Breslavsky, Dmytro; Palamarchuk, Pavlo; Tolstolutska, Galyna; Altenbach, Holm
In: Voprosy atomnoj nauki i techniki - Char'kov, Bd. 2 (2023), Heft 144, S. 8-14
Begutachteter Zeitschriftenartikel
Editorial
Altenbach, Holm; Ivanova, Elena; Müller, Wolfgang H.
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 4, Artikel 202302003
Begutachteter Zeitschriftenartikel
Size effects in the elastic properties of polycrystalline silicon
Aßmus, Marcus; Zabiensky, Max; Weber, Martin; Altenbach, Holm
In: Applied research - Weinheim : Wiley-VCH, Bd. 3 (2023), Heft 1, Artikel e202300014, insges. 18 S.
Begutachteter Zeitschriftenartikel
An overview of selected material properties in finite element modeling of the human femur
Bazyar, Pourya; Baumgart, Andreas; Altenbach, Holm; Usbeck, Anna
In: Biomechanics - Basel, Switzerland: MDPI, Bd. 3 (2023), Heft 1, S. 124-135
Begutachteter Zeitschriftenartikel
Elastic properties of polycrystalline silicon: experimental findings, effective estimates, and their relations
Aßmus, Marcus; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 35 (2023), Heft 2, S. 595-624
Herausgeberschaft
Advances in mechanics of time-dependent materials
Altenbach, Holm; Kaplunov, Julius; Lu, Hongbing; Nakada, Masayuki
In: Cham: Springer Nature, 2023, 1 Online-Ressource (XIV, 247 Seiten) - (Advanced structured materials; volume 188), ISBN: 978-3-031-22401-0
Herausgeberschaft
Advances in mechanics - current research results of the NAS of Ukraine
Guz, Aleksander N.; Altenbach, Holm; Bogdanov, Viacheslav; Nazarenko, Vladimir M.
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource - (Advanced structured materials; volume 191), ISBN: 978-3-031-37313-8
Herausgeberschaft
Mechanics of High-Contrast Elastic Solids - Contributions from Euromech Colloquium 626
Altenbach, Holm; Prikazchikov, Danila; Nobili, Andrea
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XII, 264 p. 83 illus., 67 illus. in color.) - (Advanced Structured Materials; 187), ISBN: 978-3-031-24141-3
Herausgeberschaft
Mechanics of Heterogeneous Materials
Altenbach, Holm; Bruno, Giovanni; Eremeyev, Victor A.; Gutkin, Mikhail Yu.; Müller, Wolfgang H.
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XXXI, 513 p. 271 illus., 201 illus. in color.) - (Advanced Structured Materials; 195), ISBN: 978-3-031-28744-2
Herausgeberschaft
Progress in continuum mechanics
Altenbach, Holm; Irschik, Hans; Porubov, Alexey
In: 2023, 1 Online-Ressource - ( Advanced structured materials; 196), ISBN: 978-3-031-43736-6
Herausgeberschaft
Solid Mechanics, Theory of Elasticity and Creep
Altenbach, Holm; Mkhitaryan, Suren Manuk; Hakobyan, Vahram; Sahakyan, Avetik Varazdat
In: Cham: Springer, 2023, 1 Online-Ressource (XXII, 373 Seiten) - (Advanced structured materials; volume 185), ISBN: 978-3-031-18564-9
Herausgeberschaft
Deformation and destruction of materials and structures under quasi-static and impulse loading
Altenbach, Holm; Eremeyev, Victor A.; Igumnov, Leonid A.; Bragov, Anatoly
In: Cham: Springer, 2023, 1 Online-Ressource - (Advanced structured materials$186), ISBN: 978-3-031-22093-7
Herausgeberschaft
Advances in Mechanical and Power Engineering - selected papers from The International Conference on Advanced Mechanical and Power Engineering (CAMPE 2021), October 18-21, 2021
Altenbach, Holm; Cheng, Alexander H.-D.; Gao, Xiao-Wei; Kostikov, Аndrii; Kryllowicz, Wladyslaw; Lampart, Piotr; Popov, Viktor; Rusanov, Andrii; Syngellakis, Stavros
In: Cham: Springer Nature Switzerland AG, 2023, 1 Online-Ressource (XVI, 378 pages) - (Lecture notes in mechanical engineering), ISBN: 978-3-031-18487-1 Kongress: CAMPE 2021 14 Kharkiv, Ukraine 2021.10.18-21
Herausgeberschaft
Engineering Design Applications V - Structures, Materials and Processes
Öchsner, Andreas; Altenbach, Holm
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XVI, 429 p. 303 illus., 271 illus. in color.) - (Advanced Structured Materials; 171), ISBN: 978-3-031-26466-5
Wissenschaftliche Monographie
Technische Mechanik Technische Mechanik Festigkeitslehre
Altenbach, Holm
In: [Heidelberg]: Springer Vieweg, 2022, xii, 434 Seiten - (Lehrbuch), ISBN: 3-658-41028-0 [Literaturverzeichnis: Seite 425-428]
Wissenschaftliche Monographie
Advances in Linear and Nonlinear Continuum and Structural Mechanics
Altenbach, Holm; Eremeyev, Victor A.
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XXIII, 590 p. 225 illus., 145 illus. in color.) - (Advanced Structured Materials; 198), ISBN: 978-3-031-43210-1
Begutachteter Zeitschriftenartikel
Deformation analysis of friction welded hybrid structures
Heppner, Eric; Glüge, Rainer; Weber, Martin; Woschke, Elmar
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 22 (2023), Heft 1, Artikel e202100206, insges. 2 S.
2022
Buchbeitrag
Preface
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Material modeling and structural mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. vii-xi - (Advanced Structured Materials; 161)
Buchbeitrag
Preface
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Material modeling and structural mechanics - Cham: Springer; Altenbach, Holm *1956-* . - 2022, S. vii-xi
Buchbeitrag
Influence of thermal stabilisation on the thermal regime in the strapdown inertial navigation system
Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Altenbach, Holm
In: Material Modeling and Structural Mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. 177-188 - (Advanced structured materials; volume 161)
Begutachteter Zeitschriftenartikel
Damage patterns in float glass plates - experiments and peridynamics analysis
Naumenko, Konstantin; Pander, Matthias; Würkner, Mathias
In: Theoretical and applied fracture mechanics - Amsterdam: North-Holland, Bd. 118 (2022)
Begutachteter Zeitschriftenartikel
Analytical solution of the peridynamic equation of motion for a 2-dimensional rectangular membrane
Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin; Vazic, Bozo
In: Journal of peridynamics and nonlocal modeling - [Cham]: Springer International Publishing . - 2022, insges. 17 S.
Begutachteter Zeitschriftenartikel
Analytical solution of 1-dimensional peridynamic equation of motion
Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin
In: Journal of peridynamics and nonlocal modeling - [Cham]: Springer International Publishing . - 2022, insges. 19 S.
Begutachteter Zeitschriftenartikel
Elastic plate under low velocity impact: Classical continuum mechanics vs peridynamics analysis
Altenbach, Holm; Larin, Oleksiy; Naumenko, Konstantin; Sukhanova, Olha; Würkner, Mathias
In: AIMS Materials Science - Springfield, Mo.: AIMS Press, Bd. 9 (2022), 5, S. 702-718
Begutachteter Zeitschriftenartikel
Beam buckling analysis in peridynamic framework
Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: Archive of applied mechanics - Berlin : Springer . - 2022, insges. 12 S.
Begutachteter Zeitschriftenartikel
Some analytical solutions to peridynamic beam equations
Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: ZAMM - Berlin : Wiley-VCH, Bd. 102 (2022), Heft 10, Artikel e202200132, insges. 16 S.
Begutachteter Zeitschriftenartikel
Strength analysis of laminated glass/EVA interfaces - microstructure, peel force and energy of adhesion
Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Thavayogarajah, Nishanth; Würkner, Mathias
In: Composite structures - Amsterdam: Elsevier, Bd. 297 (2022)
Begutachteter Zeitschriftenartikel
A non-linear direct peridynamics plate theory
Naumenko, Konstantin; Eremeyev, Victor A.
In: Composite structures - Amsterdam: Elsevier, Bd. 279 (2022)
Begutachteter Zeitschriftenartikel
Some closed form series solutions to peridynamic plate equations
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Altenbach, Holm; Oterkus, Erkan; Oterkus, Selda
In: Mechanics research communications - Amsterdam [u.a.]: Elsevier . - 2022
Herausgeberschaft
Material Modeling and Structural Mechanics
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Cham: Imprint: Springer, 2022., 1st ed. 2022., 1 Online-Ressource(XXII, 336 p. 163 illus., 131 illus. in color.) - (Springer eBook Collection; Advanced Structured Materials; 161)
Buchbeitrag
Modeling the inelastic behavior of high-temperature steels using a two-time-scale approach
Knape, Katharina; Altenbach, Holm
In: Lectures notes on advanced structured materials - Cham: Springer International Publishing; Altenbach, Holm *1956-* . - 2022, S. 357-367 - (Advanced structured materials; volume 153)
Buchbeitrag
Composite mechanics
Altenbach, Holm
In: Lectures notes on advanced structured materials - Cham: Springer International Publishing; Altenbach, Holm *1956-* . - 2022, S. 3-27 - (Advanced structured materials; volume 153)
Buchbeitrag
General forms of limit surface - application for isotropic materials
Altenbach, Holm; Kolupaev, Vladimir A.
In: Material Modeling and Structural Mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. 19-94 - (Advanced structured materials; volume 161)
Buchbeitrag
Preface
Altenbach, Holm; Bauer, Svetlana M.; Belyaev, Alexander K.; Indeitsev, Dmitri A.; Matveenko, Valery P.; Petrov, Yuri V.
In: Advances in solid and fracture mechanics - Springer; Altenbach, Holm *1956-* . - 2022, S. v-xii - (Advanced structured materials; volume 180)
Buchbeitrag
Stress distribution at the wavy surface of a solid incorporating surface stresses and surface tension
Kostyrko, Sergey; Altenbach, Holm; Grekov, Mikhail
In: Advances in solid and fracture mechanics - Springer; Altenbach, Holm *1956-* . - 2022, S. 151-166 - (Advanced structured materials; volume 180)
Buchbeitrag
Untersuchungen zur Ermittlung der zyklischen Kennwerte von dünnem Elektroblech im Rahmen der rechnerischen Lebensdauerabschätzung
Kubaschinski, P.; Baruth, A.; Tetzlaff, U.; Altenbach, Holm; Waltz, M.
In: Betriebsfestigkeit - Wissensmanagement und Methodenentwicklung entlang der Wertschöpfungskette/ Deutscher Verband für Materialforschung und -prüfung - Berlin: Deutscher Verband für Materialforschung und -prüfung e.V. . - 2022, S. 163-178
Buchbeitrag
Modeling the slow crack growth of an edge crack within the cohesive zone model approach
Selivanov, Mikhailo; Nazarenko, Lidiia; Altenbach, Holm
In: Theoretical analyses, computations, and experiments of multiscale materials - a tribute to Francesco dellIsola - Cham: Springer International Publishing; Giorgio, Ivan . - 2022, S. 505-535 - (advanced structured materials; volume 175)
Buchbeitrag
The use of the homogenization method in the analysis of anisotropic creep in metal-matrix composites
Altenbach, Holm; Lvov, Gennady; Lvov, Ivan; Morachkovsky, Oleg
In: Material Modeling and Structural Mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. 1-18 - (Advanced structured materials; volume 161)
Begutachteter Zeitschriftenartikel
On analytical estimates of the effective elastic properties of polycrystalline silicon
Aßmus, Marcus; Altenbach, Holm
In: Vestnik Sankt-Peterburgskogo Universiteta / 1/ Sankt-Peterburgskij gosudarstvennyj universitet - Sankt Peterburg: Univ., Bd. 9 (2022), 3, S. 440-451
Begutachteter Zeitschriftenartikel
Generalized continua with applications
Altenbach, Holm; Eremeyev, Victor A.
In: Continuum mechanics and thermodynamics - analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, Bd. 34 (2022), 4, S. 893-894
Begutachteter Zeitschriftenartikel
Delamination of multilayered inhomogeneous beams under nonlinear creep
Rizov, Victor; Altenbach, Holm
In: Journal of applied mechanics and technical physics - New York, NY [u.a.]: Consultants Bureau, Bd. 63 (2022), 5, S. 860-868
Begutachteter Zeitschriftenartikel
O nekotorych kriterijach predelʹnogo sostojanija v mechanike tvergogo tela
Altenbach, Holm
In: Prikladnaja matematika i mechanika - Moskva: Izdatelʹstvo "Nauka", Bd. 86 (2022), 4, S. 477-487
Begutachteter Zeitschriftenartikel
On weak solutions of boundary values problem in the theory of Cosserat porous bodies
Marin, Marin; Altenbach, Holm; Abbas, Ibrahim
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 6, Artikel 202200164, insges. 9 S.
Begutachteter Zeitschriftenartikel
Analysis of the negative impacts of coffee husk on the local environment of Ethiopia
Tolessa Amena, Berhanu; Altenbach, Holm; Shunki Tibba, Getachew; Lemu, Hirpa G.
In: European Chemical Bulletin - Budapest, Bd. 11 (2022), 11, S. 18-26
Begutachteter Zeitschriftenartikel
Investigation of mechanical properties of coffee Husk-HDPE-ABS polymer composite using injection-molding method
Tolessa Amena, Berhanu; Altenbach, Holm; Shunki Tibba, Getechew; Hossain, Nazia
In: Journal of composites science - Basel: MDPI, Bd. 6 (2022), 12, insges. 13 S.
Begutachteter Zeitschriftenartikel
Minimization of thermal stress in perforated composite plate using metaheuristic algorithms WOA, SCA and GA
Jafari, Mohammad; Hossein Bayati Chaleshtari, Mohammad; Khoramishad, Hadi; Altenbach, Holm
In: Composite structures - Amsterdam: Elsevier, Bd. 304 (2022), Part 2
Begutachteter Zeitschriftenartikel
Solution of variable-order partial integro-differential equation using Legendre wavelet approximation and operational matrices
Biswas, Chetna; Das, Subir; Singh, Anup; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 2, Artikel e202200222, insges. 16 S.
Begutachteter Zeitschriftenartikel
Physico-chemical characterization of alkali-treated Ethiopian Arabica coffee husk fiber for composite materials production
Amena, Berhanu Tolessa; Altenbach, Holm; Tibba, Getechew Shunki; Hossain, Nazia
In: Journal of composites science - Basel: MDPI, Bd. 6 (2022), 8, insges. 10 S.
Begutachteter Zeitschriftenartikel
Multilayered frame structure subjected to non-linear creep - a delamination analysis
Rizov, Victor I.; Altenbach, Holm
In: Coupled systems mechanics - Daejeon: Techno-Press, Bd. 11 (2022), 3, S. 217-231
Begutachteter Zeitschriftenartikel
On the optical thermography in selective laser melting process
Tomas, Josef; Markus, Merkel; Altenbach, Holm
In: Mechanics of solids - New York, NY: Allerton, Bd. 57 (2022), 3, S. 597-603
Begutachteter Zeitschriftenartikel
Interaction among offset parallel cracks in an orthotropic plane under thermo-mechanical loading
Tanwar, Anshika; Singh, Ritika; Das, Subir; Altenbach, Holm
In: ZAMM - Berlin: Wiley-VCH, Bd. 102 (2022), 7, insges. 14 S.
Begutachteter Zeitschriftenartikel
Calibration of a combined isotropic-kinematic hardening material model for the simulation of thin electrical steel sheets subjected to cyclic loading - Kalibrierung eines Materialmodells für die Simulation von zyklisch beanspruchten dünnen Elektroblechen unter Berücksichtigung kombinierter isotroper-kinematischer Verfestigung
Kubaschinski, P.; Gottwalt, A.; Tetzlaff, U.; Altenbach, Holm; Waltz, M.
In: Materials science and engineering technology - Weinheim: Wiley-VCH, Bd. 53 (2022), 4, S. 422-439
Begutachteter Zeitschriftenartikel
Multi-layered non-linear viscoelastic beams subjected to torsion at a constant speed - a delamination analysis
Rizov, Victor; Altenbach, Holm
In: Engineering transactions - Warszawa: Polish Scientific Publ., Bd. 70 (2022), 1, S. 53-66
Begutachteter Zeitschriftenartikel
On variational principles in coupled strain-gradient elasticity
Nazarenko, Lidiia; Glüge, Rainer; Altenbach, Holm
In: Mathematics and mechanics of solids - Thousand Oaks, Calif. [u.a.]: Sage . - 2022, insges. 19 S.
Begutachteter Zeitschriftenartikel
On the elastic wedge problem within simplified and incomplete strain gradient elasticity theories
Solyaev, Yury; Lurie, Sergey; Altenbach, Holm; dellIsolad, Francesco
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 239-240 (2022)
Begutachteter Zeitschriftenartikel
Utilization of coffee husk as an alternative source - a current trend
Tolessa, Berhanu; Altenbach, Holm; Tibba, Getachew Shunki; Singh, Balkeshwar
In: Tierärztliche Praxis - Stuttgart: Schattauer, Bd. 42 (2022), 1, S. 18-30
Begutachteter Zeitschriftenartikel
Efficient free vibration analysis of FGM sandwich flat panels with conventional shell elements
Burlayenko, Vyacheslav N.; Sadowski, Tomasz; Altenbach, Holm
In: Mechanics of advanced materials and structures - London: Taylor & Francis, Bd. 29 (2022), 25, S. 3709-3726
Begutachteter Zeitschriftenartikel
Shrinkage simulation of blow molded parts using viscoelastic material models - Schwindungssimulation blasgeformter Bauteile unter Verwendung viskoelastischer Materialmodelle
Michels, P.; Bruch, O.; Evers-Dietze, B.; Grotenburg, D.; Ramakers-van Dorp, E.; Altenbach, Holm
In: Materials science and engineering technology - Weinheim: Wiley-VCH, Bd. 53 (2022), 4, S. 449-466
Habilitation
Charakterisierung von polymeren Peelsystemen durch Anwendung neuartiger Methoden der experimentellen Bruchmechanik
Nase, Michael; Altenbach, Holm
In: Düren: Shaker Verlag, 2022, XI, 163 Seiten, Illustrationen, Diagramme, 21 cm x 14.8 cm, 269 g - (Berichte aus der Kunststofftechnik)
Herausgeberschaft
Advanced theories for deformation, damage and failure in materials
Altenbach, Holm; Ganczarski, Artur
In: Cham: Springer, 2023, 1 Online-Ressource - (CISM courses and lectures; volume 605), ISBN: 978-3-031-04354-3 Kongress: Course Advanced Theories for Deformation, Damage and Failure in Materials Online 2020.05.04-08
Herausgeberschaft
Theoretical analyses, computations, and experiments of multiscale materials - a tribute to Francesco dellIsola
Giorgio, Ivan; Placidi, Luca; Barchiesi, Emilio; Abali, Bilen Emek; Altenbach, Holm; Dell'Isola, Francesco
In: Cham: Imprint: Springer, 2022., 1 Online-Ressource (XLIX, 707 Seiten) - (Advanced structured materials; volume 175)
Herausgeberschaft
Engineering design applications IV - structures, materials and processes
Öchsner, Andreas; Altenbach, Holm
In: Cham: Springer International Publishing, 2022, 1 Online-Ressource (XIII, 250 pages) - (Advanced structured materials; volume 172)
Herausgeberschaft
Recent approaches in the theory of plates and plate-like structures
Altenbach, Holm; Bauer, Svetlana; Eremeyev, Victor; Mikhasev, Gennadi I.; Morozov, Nikita F.
In: Springer International Publishing, 2022, 1 Online-Ressource (XXVI, 306 Seiten) - (Springer eBook Collection; Advanced structured materials; 151)
Herausgeberschaft
Lectures notes on advanced structured materials
Altenbach, Holm; Johlitz, Michael; Merkel, Markus; Öchsner, Andreas
In: Cham: Springer International Publishing, 2022, 1 Online-Ressource - ( Advanced structured materials; volume 153)
Herausgeberschaft
Advanced materials modelling for mechanical, medical and biological applications
Altenbach, Holm; Eremeyev, Victor A.; Galybin, Alexander; Vasilʹev, Andrej V.
In: Cham: Springer, 2022, 1 Online-Ressource (XXI, 466 Seiten) - (Advanced Structured Materials; volume 155)
Herausgeberschaft
Advances in solid and fracture mechanics - a liber amicorum to celebrate the birthday of Nikita Morozov
Altenbach, Holm; Bauer, Svetlana M.; Belyaev, Alexander K.; Indeitsev, Dmitri A.; Matveenko, Valery P.; Petrov, Yuri V.
In: Springer, 2022, 1 Online-Ressource - ( Advanced structured materials; volume 180)
Begutachteter Zeitschriftenartikel
Carbon nanotube-based reinforced polymers for medical applications - improving impact strength of polymer-polymer composites
AL-Maatoq, Marwah; Fuentealba, Patricio; Fachet, Melanie; Glüge, Rainer; Ali, Salah H. R.; Hoeschen, Christoph
In: Journal of nanomaterials - New York, NY : Hindawi Publ., Bd. 2022 (2022), Artikel 1760198, insges. 15 S.
2021
Buchbeitrag
Dynamics of curved laminated glass composite panels under impact loading
Sukhanova, Olha; Larin, Oleksiy; Naumenko, Konstantin; Altenbach, Holm
In: Nonlinear Mechanics of Complex Structures - From Theory to Engineering Applications - Cham: Springer International Publishing; Altenbach, Holm . - 2021, S. 91-101 - ( Advanced structured materials; volume 157)
Begutachteter Zeitschriftenartikel
Inelastic behavior of polyoxymethylene for wide strain rate and temperature ranges - constitutive modeling and identification
Filanova, Yevgeniya; Hauptmann, Johannes; Längler, Frank; Naumenko, Konstantin
In: Materials - Basel: MDPI, Bd. 14 (2021), Heft 13, Artikel 3667, insges. 17 S.
Begutachteter Zeitschriftenartikel
Temperature resistance of Mo3Si - phase stability, microhardness, and creep properties
Kauss, Olha; Obert, Susanne; Bogomol, Iurii; Wablat, Thomas; Siemensmeyer, Nils; Naumenko, Konstantin; Krüger, Manja
In: Metals - Basel: MDPI, Bd. 11 (2021), 4, insges. 17 S.
Begutachteter Zeitschriftenartikel
Experimental analysis and constitutive modeling of anisotropic creep damage in a wrought age-hardenable Al alloy
Naumenko, Konstantin; Gariboldi, Elisabetta
In: Engineering fracture mechanics - Kidlington: Elsevier Science . - 2021
Begutachteter Zeitschriftenartikel
Closed-form quaternion representations for rigid body rotation - application to error assessment in orientation algorithms of strapdown inertial navigation systems
Plaksiy, Yuriy; Breslavsky, Dmitriy; Homozkova, Irina; Naumenko, Konstantin
In: Continuum mechanics and thermodynamics - analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, Bd. 33 (2021), Heft 4, S. 1141-1160
Buchbeitrag
On dynamic optimality of anti-sandwiches
Aßmus, Marcus; Altenbach, Holm
In: Dynamics and Control of Advanced Structures and Machines - Cham: Springer; Irschik, Hans . - 2021, S. 1-11 - (Advanced Structured Materials; volumes 156)
Buchbeitrag
A material model-based finite element free vibration analysis of one-, two- and three-dimensional axially FGM beams
Burlayenko, Vyacheslav N.; Altenbach, Holm; Dimitrova, Svetlana D.
In: Konferenz: 2021 IEEE 2nd KhPI Week on Advanced Technology (KhPIWeek), Kharkiv, Ukraine, 13.-17. September 2021, 2021 IEEE 2nd KhPI Week on Advanced Technology (KhPI Week)/ IEEE KhPI Week on Advanced Technology - [Piscataway, NJ]: IEEE . - 2021, S. 628-633
Buchbeitrag
On the principles to derive plate theories
Aßmus, Marcus; Altenbach, Holm
In: Modern trends in structural and solid mechanics ; 2:Vibrations - London: ISTE; Challamel, Noël . - 2021, insges. 14 S.
Buchbeitrag
Debonding resistance evaluation in virtual testing of sandwich specimens
Burlayenko, Vyacheslav N.; Altenbach, Holm; Dimitrova, Svetlana D.
In: Nonlinear Mechanics of Complex Structures - From Theory to Engineering Applications - Cham: Springer International Publishing; Altenbach, Holm . - 2021, S. 19-38 - ( Advanced structured materials; volume 157)
Buchbeitrag
Preface
Altenbach, Holm; Eremeyev, Victor A.; Igumnov, Leonid A.
In: Multiscale solid mechanics - Cham: Springer; Altenbach, Holm *1956-* . - 2021, S. v-vi
Begutachteter Zeitschriftenartikel
Inverse Hooke's law and complementary strain energy in coupled strain gradient elasticity
Nazarenko, Lidiia; Glüge, Rainer; Altenbach, Holm
In: ZAMM - Berlin: Wiley-VCH, Bd. 101 (2021), 9
Begutachteter Zeitschriftenartikel
Numerical simulation of the fused deposition modeling for the manufacturing of parts with both high geometric fidelity and mechanical quality
Altenbach, Holm; Janiga, Gábor; Beiner, Mario; Androsch, Rene; Runge, Paul-Maximilian
In: Žurnal Sibirskogo Federalʹnogo Universiteta / Serija Matematika i fizika/ Sibirskij Federalʹnyj Universitet - Krasnojarsk, Bd. 14 (2021), 6, S. 712-725
Begutachteter Zeitschriftenartikel
Generalized Brinkman-type fluid model and coupled heat conductivity problem
Belov, P. A.; Altenbach, Holm; Lurie, S. A.; Nazarenko, Lidiia; Kriven, G. I.
In: Lobachevskii journal of mathematics - [Moskva]: Russian Acad. of Sciences [u.a.], Bd. 42 (2021), 8, S. 1786-1799
Begutachteter Zeitschriftenartikel
Hashin-Shtrikman bounds of cubic crystalline aggregate elasticity for poly-Si solar cells
Aßmus, Marcus; Glüge, Rainer; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 41 (2020), 1, S. 24-33, 2021
Begutachteter Zeitschriftenartikel
Uniqueness theorem in coupled strain gradient elasticity with mixed boundary conditions
Nazarenko, Lidiia; Glüge, Rainer; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 34 (2022), Heft 1, S. 93-106
Begutachteter Zeitschriftenartikel
Locally-synchronous, iterative solver for Fourier-based homogenization
Glüge, R.; Altenbach, Holm; Eisenträger, S.
In: Computational mechanics - Berlin : Springer, Bd. 68 (2021), Heft 3, S. 599-618
Begutachteter Zeitschriftenartikel
Coupled effect of curved surface and interface on stress state of wrinkled thin film coating at the nanoscale
Kostyrko, Sergey; Grekov, Mikhail; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 101 (2021), Heft 8, Artikel e202000202
Begutachteter Zeitschriftenartikel
Destruction of PMMA after the irradiation with high-energy electrons and a mechanical point impact
Kozhamkulov, B.; Kadyrakunov, K.; Jumadillayev, K.; Primkulova, Zh.; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, Bd. 56 (2021), S. 817-824
Begutachteter Zeitschriftenartikel
Study of collinear cracks in a composite medium subjected to time‐harmonic wave disturbance
Trivedi, Neha; Das, Subir; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 101 (2021), Heft 6, Artikel e202000307
Begutachteter Zeitschriftenartikel
Transversely isotropic visco-thermo-elastic nanobeam with time harmonic laser pulse and new modified three phase lag Green-Nagdhi model
Kaur, Iqbal; Singh, Kulvinder; Craciun, Eduard-Marius; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 102 (2022), Heft 4, Artikel e202100263
Begutachteter Zeitschriftenartikel
Positive definiteness in coupled strain gradient elasticity
Nazarenko, Lidiia; Glüge, Rainer; Altenbach, Holm
In: Continuum mechanics and thermodynamics - analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, Bd. 33 (2021), S. 713-725
Begutachteter Zeitschriftenartikel
Evolution of the stiffness tetrad in fiber-reinforced materials under large plastic strain - material plasticity
Weber, Martin; Glüge, Rainer; Altenbach, Holm
In: Archive of applied mechanics - Berlin: Springer, Bd. 91 (2021), S. 1371-1390
Begutachteter Zeitschriftenartikel
Rheological modeling in solid mechanics from the beginning up to now
Altenbach, Holm; Eisenträger, Johanna
In: Lecture notes of TICMI/ Tbilisi International Centre of Mathematics and Informatics - Tbilisi: Univ. Press, Bd. 22 (2021), S. 13-29
Begutachteter Zeitschriftenartikel
Effective properties of particulate nano-composites including Steigmann-Ogden model of material surface
Nazarenko, Lidiia; Stolarski, Henryk; Altenbach, Holm
In: Computational mechanics - Berlin : Springer, Bd. 68 (2021), Heft 3, S. 651-665
Begutachteter Zeitschriftenartikel
Cutting mechanics analysis in turning process to optimise product sustainability
Wakjira, Melesse Workneh; Altenbach, Holm; Ramulu, Perumalla Janaki
In: Advances in materials and processing technologies - Abingdon, Oxon : Taylor & Francis, Bd. 7 (2021), Heft 3, S. 446-462
Herausgeberschaft
Nonlinear mechanics of complex structures - from theory to engineering applications
Altenbach, Holm; Amabili, Marco; Mikhlin, Yuri V.
In: Cham: Springer, 2021, 1 Online-Ressource (XXIX, 469 Seiten) - (Advanced structured materials; volume 157; Springer eBook Collection), ISBN: 978-3-030-75890-5
Herausgeberschaft
Behavior of metallic and composite structures (second volume)
Sadowski, Tomasz; Altenbach, Holm
In: Basel: MDPI, 2021, 1 Online-Ressource
Begutachteter Zeitschriftenartikel
Framework for modelling the elastoplastic behaviour of friction welded lightweight structures under tension
Heppner, Eric; Glüge, Rainer; Weber, Martin; Woschke, Elmar
In: Proceedings in applied mathematics and mechanics - Weinheim: Wiley-VCH, Bd. 20 (2021), 1, insges. 2 S.
2020
Buchbeitrag
Cohesive zone models-theory, numerics and usage in high-temperature applications to describe cracking and delamination
Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2019, S. 131-168, 2020 - (Advanced structured materials; 117)
Buchbeitrag
Laminated plates with non-linear visco-elastic interlayer - the governing equations
Naumenko, Konstantin; Altenbach, Holm
In: Analysis of shells, plates, and beams - Cham: Springer; Altenbach, Holm . - 2020, S. 297-310 - (Advanced structured materials; volume 134)
Buchbeitrag
Heat transfer analysis in the strapdown inertial unit of the navigation system
Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Schastlivets, Kyrill Yu.
In: Plasticity, damage and fracture in advanced materials - Cham: Springer, 2020; Altenbach, Holm . - 2020, S. 119-133
Buchbeitrag
Analysis of a power plant rotor made of tempered martensitic steel based on a composite model of inelastic deformation
Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 1-34 - (Advanced structured materials; 117)
Buchbeitrag
Structural analysis of gas turbine blades made of Mo-Si-B under stationary thermo-mechanical loads
Kauss, Olha; Naumenko, Konstantin; Hasemann, Georg; Krüger, Manja
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 79-91 - (Advanced structured materials; 117)
Begutachteter Zeitschriftenartikel
A direct approach to evaluate interaction forces between self-adhesive polymeric films subjected to T-peeling
Naumenko, Konstantin; Bagheri, Behnaz
In: Archive of applied mechanics - Berlin: Springer, Bd. 91 (2021), S. 629-641
Begutachteter Zeitschriftenartikel
Stress-regime-dependence of inelastic anisotropy in forged age-hardening aluminium alloys at elevated temperature - constitutive modeling, identification and validation
Naumenko, Konstantin; Gariboldi, Elisabetta; Nizinkovskyi, Rostyslav
In: Mechanics of materials: forum for theoretical, experimental and field advances in mechanics of flow, fracture and general constitutive behavior of geophysical, geotechnical and technological materials - Amsterdam: Elsevier, Volume 141(2020), Article 103262
Artikel in Zeitschrift
Influence of structure gradients in injection moldings of isotactic polypropylene on their mechanical properties
Mahmood, Nasir; Kolesov, Igor; Glüge, Rainer; Altenbach, Holm; Androsch, René; Beiner, Mario
In: Polymer - Oxford: Elsevier Science, 1960, Volume 200 (2020), article 122556
Buchbeitrag
A mathematically consistent vector-matrix representation of generalized Hookes law for shear-rigid plates
Aßmus, Marcus; Altenbach, Holm
In: Nonlinear Wave Dynamics of Materials and Structures - Cham: Springer International Publishing; Altenbach, Holm . - 2020, S. 57-67 - ( Advanced structured materials; volume 122)
Buchbeitrag
Preface
Altenbach, Holm; Chinchaladze, Natalia; Kienzler, Reinhold; Müller, Wolfgang H.
In: Analysis of shells, plates, and beams - Cham: Springer; Altenbach, Holm, 2020, Seite vii-xx - (Advanced structured materials; volume 134)
Buchbeitrag
Interface strength assessments of sandwich panels with a face sheet/core debond
Burlayenko, Vyacheslav N.; Altenbach, Holm; Dimitrova, Svetlana D.
In: Analysis of shells, plates, and beams - Cham: Springer; Altenbach, Holm . - 2020, S. 95-122 - (Advanced structured materials; volume 134)
Begutachteter Zeitschriftenartikel
Scientific language - a comparative analysis of english, german and russian
Altenbach, Holm
In: Technology and language - Sankt-Petersburg: Peter the Great St. Petersburg Polytechnic University, Bd. 1 (2020), 1, insges. 5 S.
Begutachteter Zeitschriftenartikel
On the main directions in creep mechanics of metallic materials
Altenbach, Holm; Knape, Katharina
In: Hayastani Gitowt'yownneri Azgayin Akademiayi teġekagir / Mexanika/ Hayastani Gitowt'yownneri Azgayin Akademia - Erevan: Akad., Bd. 73 (2020), 3, S. 24-43
Begutachteter Zeitschriftenartikel
On the difference between the tensile stiffness of bulk and slice samples of microstructured materials
Glüge, Rainer; Altenbach, Holm; Mahmood, Nasir; Beiner, Mario
In: Applied composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, Bd. 27 (2020), S. 969-988
Begutachteter Zeitschriftenartikel
On the analytical estimation for isotropic approximation of elastic properties applied to polycrystalline cubic silicon used at solar cells
Aßmus, Marcus; Glüge, Rainer; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 40 (2020), 2, S. 120-133
Begutachteter Zeitschriftenartikel
Modeling creep-fatigue interaction damage and H13 tool steel material response for rolling die under hot milling
Tolcha, Mesay Alemu; Altenbach, Holm; Tibba, Getachew Shunki
In: Engineering fracture mechanics - Kidlington: Elsevier Science, Volume 223 (2020), article 106770
Begutachteter Zeitschriftenartikel
Longitudinal fracture analysis of inhomogeneous beams with continuously varying sizes of the cross-section along the beam length
Rizov, Victor; Altenbach, Holm
In: Frattura ed integrità strutturale - Cassino, Bd. 14 (2020), 53, S. 38-50
Begutachteter Zeitschriftenartikel
On the derivation of Hookes law for plane state conditions
Nordmann, Joachim; Aßmus, Marcus; Glüge, Rainer; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 40 (2020), 2, S. 160-174
Begutachteter Zeitschriftenartikel
Editorial
Altenbach, Holm; Müller, Wolfgang H.
In: ZAMM - Berlin: Wiley-VCH, Volume 100 (2020), issue 5, article e202002024
Begutachteter Zeitschriftenartikel
Longitudinal fracture analysis of an inhomogeneous stepped rod with two concentric cracks in torsion
Rizov, Victor; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 40 (2020), 2, S. 149-159
Begutachteter Zeitschriftenartikel
Optimum design of infinite perforated orthotropic and isotropic plates
Jafari, Mohammad; Hoseyni, Seyed Ahmad Mahmodzade; Altenbach, Holm; Craciun, Eduard-Marius
In: Mathematics - Basel: MDPI, Volume 8 (2020), issue 4, article 569, 23 Seiten
Begutachteter Zeitschriftenartikel
Influence of material non-linearity on delamination in multilayered three-point bending beams
Rizov, Victor; Altenbach, Holm
In: Journal of theoretical and applied mechanics / Bulgarian Academy of Sciences, National Committee of Theoretical and Applied Mechanics - Sofia: Publ. House of the Bulg. Acad. of Sciences, Bd. 50 (2020), 1, S. 70-82
Begutachteter Zeitschriftenartikel
Editorial
Altenbach, Holm; Nijboer, Bette
In: ZAMM - Berlin: Wiley-VCH, 100(2020,1), Artikel e201901997, 4 Seiten
Begutachteter Zeitschriftenartikel
Modeling cylindrical inhomogeneity of finite length with Steigmann-Ogden Interface
Nazarenko, Lidiia; Stolarski, Henryk; Altenbach, Holm
In: Technologies - Basel: MDPI, Volume 8(2020), issue 4, article 78, 15 Seiten
Herausgeberschaft
Modeling, synthesis and fracture of advanced materials for industrial and medical applications
Aizikovich, Sergei M.; Altenbach, Holm; Eremeyev, Victor; Swain, Michael Vincent; Galybin, Alexander
In: Cham: Springer, 2020, 1 Online-Ressource - (Springer eBook Collection; Advanced Structured Materials; volume 136)
Herausgeberschaft
Multiscale solid mechanics - strength, durability, and dynamics
Altenbach, Holm; Eremeyev, Victor A.; Igumnov, Leonid A.
In: Cham: Springer, 2020, 1 Online-Ressource - (Springer eBook Collection; Advanced Structured Materials; volume 141)
Herausgeberschaft
Encyclopedia of continuum mechanics. Volume 3: N-Z
Altenbach, Holm; Öchsner, Andreas
In: [Heidelberg]: Springer, 2020, xlvii Seiten, Seite 1772-2806, Illustrationen, Diagramme, 26 cm - (Springer reference)
Herausgeberschaft
Plasticity, damage and fracture in advanced materials
Altenbach, Holm; Brünig, Michael; Kowalewski, Zbigniew L.
In: Cham: Springer, 2020, 1 Online-Ressource - (Springer eBooks; Chemistry and Materials Science; Springer eBook Collection; Advanced structured materials; 121)
Herausgeberschaft
Encyclopedia of continuum mechanics. Volume 2: F-M
Altenbach, Holm; Öchsner, Andreas
In: [Heidelberg]: Springer, 2020, xlvii Seiten, Seite 880-1769, Illustrationen, Diagramme, 26 cm - (Springer reference)
Herausgeberschaft
Nonlinear Wave Dynamics of Materials and Structures
Altenbach, Holm; Eremeyev, Victor A.; Pavlov, Igor S.; Porubov, Alexey V.
In: Cham: Imprint: Springer, 2020., 1st ed. 2020., 1 Online-Ressource(XXV, 461 p. 150 illus., 87 illus. in color.) - (Springer eBook Collection; Advanced Structured Materials; 122)
Herausgeberschaft
Analysis of shells, plates, and beams - a state of the art report
Altenbach, Holm; Chinchaladze, Natalia; Kienzler, Reinhold; Müller, Wolfgang H.
In: Cham: Springer, 2020, 1 Online-Ressource - (Advanced Structured Materials; volume 134)
Herausgeberschaft
Encyclopedia of continuum mechanics. Volume 1: A-E
Altenbach, Holm; Öchsner, Andreas
In: [Heidelberg]: Springer, 2020, xlvii, 877 Seiten, Illustrationen, Diagramme, 26 cm - (Springer reference)
Wissenschaftliche Monographie
Holzmann/Meyer/Schumpich Technische Mechanik Festigkeitslehre - 104 Aufgaben, 133 Beispiele und zahlreiche Klausuraufgaben mit Lösungen
Altenbach, Holm
In: Wiesbaden: Springer Vieweg, 2020, 14., überarbeitete und erweiterte Auflage, 1 Online-Ressource (xii, 434 Seiten) - (Springer eBook Collection)
2019
Buchbeitrag
Subclasses of mechanical problems arising from the direct approach for homogeneous Plates
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Recent developments in the theory of shells - Springer International Publishing, S. 43-63, 2019 - (Advanced Structured Materials; 110)
Buchbeitrag
A damage mechanics based cohesive zone model with damage gradient extension for creep-fatigue-interaction
Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm
In: Key engineering materials: KEM - Uetikon a.S.: Trans Tech Publications, 1986, Bd. 794.2019, S. 253-259
Begutachteter Zeitschriftenartikel
The problems of transient heat transfer of electroconductive bodies in the electromagnetic field
Altenbach, Holm; Naumenko, Konstantin; Lavinsky, Denis; Konkin, Valerii
In: Visnyk Nacionalʹnoho techničnoho universytetu "ChPI" - Charkiv: NTU "ChPI", 2001, Bd. 1.2019, 2, S. 9-13, 2020
Begutachteter Zeitschriftenartikel
On thermal strains and residual stresses in the linear theory of antisandwiches
Javanbakht, Z.; Aßmus, Marcus; Naumenko, Konstantin; Öchsner, A.; Altenbach, Holm
In: ZAMM - Berlin: Wiley-VCH, Volume 99, issue 8 (2019), Article e2019000062, insgesamt 17 Seiten
Begutachteter Zeitschriftenartikel
Thermomechanical analysis of a steam turbine rotor
Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.]: Wiley-VCH, Volume 19, issue 1 (2019), article e201900361
Begutachteter Zeitschriftenartikel
Numerical analysis of a steam turbine rotor subjected to thermo-mechanical cyclic loads
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39.2019, 3, S. 261-281
Begutachteter Zeitschriftenartikel
The potential of mechanical alloying to improve the strength and ductility of Mo-9Si-8B-1Zr alloys - experiments and simulation
Krüger, Manja; Kauss, Olha; Naumenko, Konstantin; Burmeister, C.; Wessel, E.; Schmelzer, Janett
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Vol. 113 (2019), Artikel 106558
Begutachteter Zeitschriftenartikel
Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads
Kauss, Olha; Tsybenko, H.; Naumenko, Konstantin; Hütter, Sebastian; Krüger, Manja
In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 165 (2019), S. 129-136
Begutachteter Zeitschriftenartikel
A generalized framework towards structural mechanics of three-layered composite structures
Aßmus, Marcus; Naumenko, Konstantin; Öchsner, Andreas; Eremeyev, Victor; Altenbach, Holm
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39 (2019), 2, S. 202-219
Begutachteter Zeitschriftenartikel
Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling
Bagheri, Behnaz; Schulze, Stefan-H.; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 216.2019, S. 222-227
Herausgeberschaft
Advances in mechanics of high-temperature materials
Naumenko, Konstantin; Krüger, Manja
In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 117), ISBN: 978-3-030-23869-8
Wissenschaftliche Monographie
Modeling High Temperature Materials Behavior for Structural Analysis. Part 2: Solution procedures and structural analysis examples
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Springer, 2019, 1 Online-Ressource, Illustrationen - (Advanced structured materials; 112)
Artikel in Zeitschrift
On the effective elastic properties of isotactic polypropylene
Glüge, Rainer; Altenbach, Holm; Kolesov, I.; Mahmood, Nasir; Beiner, Mario; Androsch, René
In: Polymer - Oxford: Elsevier Science, 1960, Bd. 160 (2019), S. 291-302
Buchbeitrag
Bingham, Eugene Cook
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Taylor, Geoffrey Ingram
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Short term transversally isotropic creep of plates under static and periodic loading
Altenbach, Holm; Breslavsky, Dmitry; Mietielov, Volodymyr; Tatarinova, Oksana
In: Advances in mechanics of high-temperature materials - Cham: Springer, S. 181-211, 2019 - (Advanced structured materials; 117)
Buchbeitrag
On nonlinear dynamic theory of thin plates with surface stresses
Altenbach, Holm; Eremeyev, Victor A.
In: Thin-walled Laminated Structures - Cham: Springer; Mikhasev, Gennadi I., S. 19-26, 2019 - (Advanced Structured Materials; 106)
Buchbeitrag
Application of equivalent cylindrical inhomogeneity to modeling of CNT and analysis of influence of CNT distributions on response of functionally graded structural elements
Nazarenko, Lidiia; Chirkov, Aleksandr Yu.; Stolarski, Henryk; Altenbach, Holm
In: Modern building materials, structures and techniques MBMST 2019 - Vilnius : Vilnius Gediminas Technical University ; Juozapaitis, Algirdas, S. 777-783
Buchbeitrag
Carathéodory, Constantin
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
On viscoelasticity in the theory of geometrically linear plates
Aßmus, Marcus; Altenbach, Holm
In: State of the art and future trends in material modeling - Holm Altenbach, Andreas Öchsner editors - Cham: Springer Nature Switzerland AG, S. 1-22, 2019 - (Advanced structured materials; 100)
Buchbeitrag
Creep in heat-resistant steels at elevated temperatures
Eisenträger, Johanna; Altenbach, Holm
In: State of the art and future trends in material modeling - Holm Altenbach, Andreas Öchsner editors - Cham: Springer Nature Switzerland AG, S. 79-112, 2019 - (Advanced structured materials; 100)
Buchbeitrag
Extreme yield figures for universal strength criteria
Rosendahl, Philipp L.; Kolupaev, Vladimir A.; Altenbach, Holm
In: State of the art and future trends in material modeling - Holm Altenbach, Andreas Öchsner editors - Cham: Springer Nature Switzerland AG, S. 259-324, 2019 - (Advanced structured materials; 100)
Buchbeitrag
Introduction to creep mechanics
Altenbach, Holm; Eisenträger, Johanna
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-9, 2019
Buchbeitrag
Newton, Isaac
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-3, 2019
Buchbeitrag
Marguerre, Karl
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Levy, Maurice
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Engesser, Friedrich
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-1, 2019
Buchbeitrag
Hooke, Robert
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Dynamic fracture analysis of sandwich composites with face sheet/core debond by the fnite element method
Burlayenko, Vyacheslav N.; Altenbach, Holm; Sadowski, Tomasz
In: Dynamical processes in generalized continua and structures - Springer International Publishing, S. 163-194, 2019 - (Advanced Structured Materials; 103)
Buchbeitrag
Maugin, Gérard A
Altenbach, Holm; Collet, Bernard; Michelitsch, Thomas; Pouget, Joel; Rousseau, Martine; Trimarco, Carmine
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-6, 2019
Buchbeitrag
Kupradze, Victor
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Stokes, George Gabriel
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Voigt, Woldemar
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Zerna, Wolfgang
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Nikuradze, Johann (Ivane)
Altenbach, Holm; Jaiani, George
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Bridgman, Percy Williams
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Kudo, Hideaki
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Muskhelishvili, Nikoloz
Altenbach, Holm; Jaiani, George
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-3, 2019
Buchbeitrag
Calculation of stress intensity factors for an arbitrary oriented penny-shaped crack under inner pressure in an orthotropic electroelastic material
Kirilyuk, Vitaly S.; Levchuk, Olga I.; Altenbach, Holm
In: New Achievements in Continuum Mechanics and Thermodynamics - A Tribute to Wolfgang H. Müller - Cham: Springer, S. 211-222, 2019 - (Advanced Structured Materials; 108)
Buchbeitrag
Three-dimensional finite element modelling of free vibrations of functionally graded sandwich panels
Burlayenko, Vyacheslav N.; Sadowski, Tomasz; Altenbach, Holm; Dimitrova, Svetlana
In: Recent developments in the theory of shells - Springer International Publishing, S. 157-177, 2019 - (Advanced Structured Materials; 110)
Buchbeitrag
CSN 12050 carbon steel mechanical property enhancement using thermal treatment to optimize product sustainability
Wakjira, Melesse Workneh; Altenbach, Holm; Ramulu, Perumalla Janaki
In: Advances of Science and Technology - Cham: Springer, S. 113-121, 2019 - (Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering; 274)[Konferenz: 6th EAI International Conference, ICAST 2018, Bahir Dar, Ethiopia, October 5-7, 2018]
Buchbeitrag
Oniashvili, Otar
Altenbach, Holm; Jaiani, George
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Palmov, Vladimir Alexandrovich
Altenbach, Holm; Belyaev, Alexander
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Zhilin, Pavel Andreevich
Altenbach, Holm; Ivanova, Elena A.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-4, 2019
Buchbeitrag
Drucker, Daniel Charles
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Gauß, Johann Carl Friedrich
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Green, George
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Love, Augustus Edward Hough
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Mushtari, Khamid Muzafarovich
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Buchbeitrag
Vekua, Ilia
Altenbach, Holm; Jaiani, George
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-3, 2019
Buchbeitrag
Westergaard, Harold Malcolm
Altenbach, Holm
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-2, 2019
Begutachteter Zeitschriftenartikel
Numerical modeling rolling contact problem and elasticity deformation of rolling die under hot milling
Tolcha, Mesay; Altenbach, Holm
In: Metals - Basel: MDPI, Bd. 9 (2019), 2, S. 226
Buchbeitrag
Frameworks for material modeling
Glüge, Rainer
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-11, 2019
Buchbeitrag
A C 1 incompatible mode element formulation for strain gradient elasticity
Glüge, Rainer
In: Higher gradient materials and related generalized continua - Cham: Springer Nature Switzerland, S. 95-120, 2019 - (Advanced Structured Materials; 120)
Begutachteter Zeitschriftenartikel
Distance of a stiffness tetrad to the symmetry classes of linear elasticity
Weber, Martin; Glüge, Rainer; Bertram, Albrecht
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 156/157 (2019), S. 281-293
Begutachteter Zeitschriftenartikel
The effect of the skin-core structure of injection-molded isotactic polypropylene on the stress distribution in bending tests
Glüge, Rainer; Mahmood, N.; Kolesov, I.; Altenbach, Holm; Beiner, M.; Androsch, R.
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39.2019, 3, S. 252-260
2018
Buchbeitrag
Angular velocities, twirls, spins and rotation tensors in the continuum mechanics revisited
Naumenko, Konstantin; Altenbach, Holm
In: Generalized Models and Non-classical Approaches in Complex Materials 1 - Cham: Springer International Publishing, 2018 . - 2018, S. 621-632 - (Advanced Structured Materials; 89)
Begutachteter Zeitschriftenartikel
Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests
Nordmann, Joachim; Thiem, Philipp; Cinca, Nuria; Naumenko, Konstantin; Krüger, Manja
In: The journal of strain analysis for engineering design : JSA - London : Sage Publ., Bd. 53.2018, 4, S. 255-265
Begutachteter Zeitschriftenartikel
Mechanical models and finite-element approaches for the structural analysis of photovoltaic composite structures - a comparative study
Haghi, M.; Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 54 (2018), Heft 4, S. 415-430
Begutachteter Zeitschriftenartikel
Verformungsanalyse elektrisch leitender metallischer Bauteile bei Magnetimpulsbearbeitung
Altenbach, Holm; Konkin, Valery; Lavinsky, Denis; Morachkovsky, Oleg; Naumenko, Konstantin
In: Forschung im Ingenieurwesen - research journal: research journal - Berlin: Springer, 1930 . - 2018[Online first]
Begutachteter Zeitschriftenartikel
Two-time-scales and time-averaging approaches for the analysis of cyclic creep based on ArmstrongFrederick type constitutive model
Altenbach, Holm; Breslavsky, Dmitry; Naumenko, Konstantin; Tatarinova, Oksana
In: Proceedings of the Institution of Mechanical Engineers / C/ Institution of Mechanical Engineers - London: Sage Publ., 1983 . - 2018[Online first]
Begutachteter Zeitschriftenartikel
Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Acta mechanica - Wien: Springer, 1965, Bd. 229.2018, 7, S. 3051-3068
Begutachteter Zeitschriftenartikel
Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 1965, Bd. 53.2018, 3, S. 156-177
Begutachteter Zeitschriftenartikel
Adaption of a Carreau fluid law formulation for residual stress determination in rotary friction welds
Rößler, Christoph; Schmicker, David; Naumenko, Konstantin; Woschke, Elmar
In: Journal of materials processing technology - Amsterdam [u.a.]: Elsevier, Bd. 252.2018, S. 567-572
Herausgeberschaft
Advances in mechanics of materials and structural analysis - in honor of Reinhold Kienzler
Altenbach, Holm; Jablonski, Frank; Müller, Wolfgang H.; Naumenko, Konstantin; Schneider, Patrick; Kienzler, Reinhold
In: [s.l.]: Springer-Verlag, 2018, 1 Online-Ressource (PDF, 19415 KB, 461 S.), ISBN: 3-319-70562-8
Buchbeitrag
Kinematics
Glüge, Rainer
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer , 2019, S. 1-7
Buchbeitrag
Continuum mechanics basics, introduction and notations
Glüge, Rainer
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer , 2019, S. 1-4
Buchbeitrag
Principles of material modeling
Glüge, Rainer
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer , 2019, S. 1-8
Buchbeitrag
Material-independent balances
Glüge, Rainer
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg: Springer, S. 1-7, 2018
Begutachteter Zeitschriftenartikel
Does convexity of yield surfaces in plasticity have a physical significance?
Glüge, Rainer; Bucci, Sara
In: Mathematics and mechanics of solids - Thousand Oaks, Calif. [u.a.]: Sage, Bd. 23.2018, 9, S. 1364-1373
2017
Abstract
Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system
Popovych, Olha; Bogomol, Iurii; Naumenko, Konstantin; Krüger, Manja
In: Konferenz: Intermetallics 2017, Intermetallics 2017 - Bad Staffelstein : Educational Center Kloster Banz, S. 115-116
Buchbeitrag
Fracture mechanics characterisation of peelfilms
Nase, M.; Rennert, M.; Henning, S.; Zankel, A.; Naumenko, Konstantin; Grellmann, W.
In: Deformation and fracture behaviour of polymer materials - Cham: Springer-Verlag, S. 271-281, 2017 - (Springer series in material science; 247)
Buchbeitrag
Prediction of stress relaxation in power plant components based on a constitutive model
Kostenko, Yevgen; Naumenko, Konstantin
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines - New York, N.Y: American Society of Mechanical Engineers, 2017, Paper No. GT2017-63608, S. V008T29A017, insgesamt 8 S.[Konferenz: ASME Turbo Expo 2017, Charlotte, North Carolina, USA, 26-30 June, 2017]
Buchbeitrag
Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln
Popovych, Olha; Naumenko, Konstantin; Krüger, Manja
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017 , korrigierte Auflage - Magdeburg : Universitätsbibliothek, S. 185-192
Buchbeitrag
Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures
Aßmus, Marcus; Bergmann, Stefan; Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Mechanics for materials and technologies - Cham, Switzerland : Springer International Publishing ; Altenbach, Holm *1956-* . - 2017, S. 73-122 - (Advanced structured materials; Volume 46)
Buchbeitrag
On the models of three-layered plates and shells with thin soft core
Eremeyev, Viktor. A.; Naumenko, Konstantin
In: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials - Singapore : Springer , 2017, S. 159-171 - (Advanced Structured Materials; 59)
Begutachteter Zeitschriftenartikel
Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 700.2017, S. 503-511
Begutachteter Zeitschriftenartikel
Mechanical behaviour of photovoltaic composite structures - influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Composites communications - Amsterdam : Elsevier, Bd. 6.2017, S. 59-62
Begutachteter Zeitschriftenartikel
A homogeneous substitute material for the core layer of photovoltaic composite structures
Aßmus, Marcus; Nordmann, J.; Naumenko, Konstantin; Altenbach, Holm
In: Composites / B - Amsterdam [u.a.]: Elsevier, 1996, Bd. 112.2017, S. 353-372
Begutachteter Zeitschriftenartikel
Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Archive of applied mechanics - Berlin: Springer, insges. 17 S., 2017
Begutachteter Zeitschriftenartikel
Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading
Aßmus, Marcus; Bergmann, Stefan; Naumenko, Konstantin; Altenbach, Holm
In: Composites communications - Amsterdam : Elsevier, Bd. 5.2017, S. 23-26
Begutachteter Zeitschriftenartikel
Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
Chowdhury, Helal; Altenbach, Holm; Krüger, Manja; Naumenko, Konstantin
In: Mechanics of advanced materials and modern processes - Berlin: Springer, 2015, Bd. 3.2017, insges. 20 S.
Begutachteter Zeitschriftenartikel
A layer-wise theory of shallow shells with thin soft core for laminated glass and photovoltaic applications
Naumenko, Konstantin; Eremeyev, Viktor A.
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 178.2017, S. 434-446
Begutachteter Zeitschriftenartikel
Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery
Chowdhury, H.; Naumenko, Konstantin; Altenbach, Holm
In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 146-147 (2018), S. 486-496
Begutachteter Zeitschriftenartikel
Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Gariboldi, Elisabetta
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 2017
Rezension
[Rezension von: Bobaru, Florin, Handbook of Peridynamic Modeling]
Naumenko, Konstantin; Bobaru, Florin
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 97.2017, 5, S. 616
Begutachteter Zeitschriftenartikel
Effective yield limits of microstructured materials
Glüge, Rainer
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 176.2017, S. 496-504
Begutachteter Zeitschriftenartikel
Material plasticity to track the elastic anisotropy at finite strains
Weber, Martin; Glüge, Rainer; Bertram, Albrecht
In: Proceedings in applied mathematics and mechanics : PAMM - Weinheim [u.a.] : Wiley-VCH, Bd. 17 (2017), 1, S. 481-482
2016
Begutachteter Zeitschriftenartikel
A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 158.2016, S. 340-358
Begutachteter Zeitschriftenartikel
Analysis of anisotropic damage in forged Al-Cu-Mg-Si alloy based on creep tests, micrographs of fractured specimen and digital image correlations
Gariboldi, Elisabetta; Naumenko, Konstantin; Ozhoga-Maslovskaja, Oksana; Zappa, Emanuele
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 652.2016, S. 175-185
Begutachteter Zeitschriftenartikel
Identifying tractionseparation behavior of self-adhesive polymeric films from in situ digital images under T-peeling
Nase, Michael; Rennert, Mirko; Naumenko, Konstantin; Eremeyev, Victor A.
In: Journal of the mechanics and physics of solids - Amsterdam [u.a.]: Elsevier Science, Bd. 91.2016, S. 40-55
Begutachteter Zeitschriftenartikel
On the choice of the power law flow rule and its consequences in crystal plasticity
Chowdhury, Helal; Altenbach, Holm; Naumenko, Konstantin
In: Key engineering materials - Aedermannsdorf: Trans Tech Publ, Bd. 725.2016, S. 359-365
Herausgeberschaft
Advanced Methods of Continuum Mechanics for Materials and Structures
Naumenko, Konstantin; Aßmus, Marcus
In: Singapore: Springer Singapore, 2016, Online-Ressource (XVII, 558 p. 194 illus., 118 illus. in color, online resource) - (Advanced Structured Materials; 60; SpringerLink; Bücher), ISBN: 978-981-10-0959-4
Herausgeberschaft
Advanced Methods of Continuum Mechanics for Materials and Structures
Naumenko, Konstantin; Aßmus, Marcus
In: Singapore: Springer Singapore, 2016, 1 Online-Ressource (555 p) - (Advanced Structured Materials; 60), ISBN: 978-981-10-0959-4
Lehrbuch
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: Heidelberg: Springer Vieweg, 2016, Online-Ressource (XIX, 531 S. 167 Abb. in Farbe, online resource) - (SpringerLink; Bücher), ISBN: 978-3-662-47230-9
Lehrbuch
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: Heidelberg: Springer Vieweg, 2016, 1 Online-Ressource (XIX, 531 Seiten), ISBN: 978-3-662-47230-9
Wissenschaftliche Monographie
Modeling High Temperature Materials Behavior for Structural Analysis - Part I: Continuum Mechanics Foundations and Constitutive Models
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Imprint: Springer, 2016, Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color, online resource) - (Advanced Structured Materials; 28; SpringerLink; Bücher), ISBN: 978-3-319-31627-7
Wissenschaftliche Monographie
Modeling high temperature materials behavior for structural analysis - part I: continuum mechanics foundations and constitutive models
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Imprint: Springer, 2016, 1 Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color) - (Advanced Structured Materials; 28), ISBN: 978-3-319-31627-7
Nicht begutachteter Zeitschriftenartikel
Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen
Altenbach, Holm; Naumenko, Konstantin
In: Rundbrief// Gesellschaft für Angewandte Mathematik und Mechanik, GAMM - Dresden: GAMM, 2, S. 4-10, 2016
Buchbeitrag
The eigenmodes in isotropic strain gradient elasticity
Glüge, Rainer; Kalisch, Jan; Bertram, Albrecht
In: Generalized Continua as Models for Classical and Advanced Materials - Cham : Springer International Publishing ; Altenbach, Holm *1956-* . - 2016, S. 163-178 - (Advanced Structured Materials; 42)
Begutachteter Zeitschriftenartikel
Effective plastic properties of laminates made of isotropic elastic plastic materials
Glüge, Rainer
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 149.2016, S. 434-443
Begutachteter Zeitschriftenartikel
Gradient materials with internal constraints
Bertram, Albrecht; Glüge, Rainer
In: Mathematics and mechanics of complex systems. - Dell'Aquila : Mathematical Science Publ, Bd. 4.2016, 1, S. 1-15
Habilitation
Beiträge zur analytischen und numerischen Homogenisierung in der Materialmodellierung
Glüge, Rainer; Bertram, Albrecht
In: Magdeburg, 2016, verschiedene Seitenzählung, Illustrationen[Literaturverzeichnis: Seite 29-39]
2015
Buchbeitrag
Approximate rules for calculation of notch stresses considering plasticity and creep
Altenbach, Holm; Eisenträger, Johanna; Naumenko, Konstantin
In: Plastic behavior of conventional and advanced materials: theory, experiment, and modeling: proceedings of Plasticity'15: the twenty first International Symposium on Plasticity and its Current Applications / editor: Akhtar S. Khan: proceedings of Plasticity'15: the twenty first International Symposium on Plasticity and its Current Applications/ International Symposium on Plasticity and its Current Applications - Fulton, Maryland, USA: NEAT Press, S. 124-126, 2015Kongress: PLASTICITY' 15 21 (Montego Bay, Jamaica : 2015.01.04-09)
Buchbeitrag
Creep behavior modeling of polyoxymethylene (POM) applying rheological models
Altenbach, Holm; Girchenko, Anna; Kutschke, Andreas; Naumenko, Konstantin
In: Inelastic behavior of materials and structures under monotonic and cyclic loading - Heidelberg [u.a.]: Springer, S. 1-5, 2015 - (Advanced structured materials; 57)
Buchbeitrag
Analysis of inelastic behavior for high temperature materials and structures
Naumenko, Konstantin; Altenbach, Holm
In: From Creep Damage Mechanics to Homogenization Methods - Cham: Springer; Altenbach, Holm *1956-* . - 2015, S. 241-298 - (Advanced structured materials; 64)
Begutachteter Zeitschriftenartikel
Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Köppe, Heinz
In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 96-97 (2015), S. 163-171
Begutachteter Zeitschriftenartikel
Inelastic deformation of conductive bodies in electromagnetic fields
Altenbach, Holm; Morachkovsky, Oleg; Naumenko, Konstantin; Lavinsky, Denis
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 28 (2016), Heft 5, S. 1421-1433
Begutachteter Zeitschriftenartikel
On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer
Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 95.2015, 10, S. 1004-1011
Begutachteter Zeitschriftenartikel
A relationship between effective work of adhesion and peel force for thin hyperelastic films undergoing large deformation
Eremeyev, Victor; Naumenko, Konstantin
In: Mechanics research communications - Amsterdam [u.a.]: Elsevier, Bd. 69.2015, S. 24-26
Begutachteter Zeitschriftenartikel
Analysis of casting materials under thermal fatigue
Altenbach, Holm; Laengler, Frank; Naumenko, Konstantin; Ievdokymov, Mykola
In: Applied mechanics and materials: AMM - [S.l.]: Scientific.Net, Bd. 784.2015, S. 95-103
Begutachteter Zeitschriftenartikel
A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory
Eisenträger, J.; Naumenko, Konstantin; Altenbach, Holm; Meenen, J.
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 133.2015, S. 265-277
Begutachteter Zeitschriftenartikel
Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band
Altenbach, Holm; Naumenko, Konstantin; Lvov, G.; Sukiasov, V.; Podgorny, A.
In: Mechanics of composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1965, Bd. 51.2015, 2, S. 139-156
Begutachteter Zeitschriftenartikel
Experimental identification of flow properties of a S355 structural steel for hot deformation processes
Schmicker, David; Paczulla, Stefan; Nitzschke, Steffen; Groschopp, Sven; Naumenko, Konstantin; Jüttner, Sven; Strackeljan, Jens
In: The journal of strain analysis for engineering design - London : Sage Publ., Bd. 50 (2015), Heft 2, S. 75-83
Begutachteter Zeitschriftenartikel
Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading
Ozhoga-Maslovskaja, Oksana; Naumenko, Konstantin; Altenbach, Holm; Prygorniev, Oleksandr
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science; Vol. 96.2015, Part A, S. 178-184
Begutachteter Zeitschriftenartikel
Microscale modelling of multiple and higher-order deformation twinning
Roy, Shyamal; Glüge, Rainer; Bertram, Albrecht
In: Acta mechanica - Wien: Springer, 1965, Bd. 226.2015, 2, S. 371-384
Begutachteter Zeitschriftenartikel
Analytical homogenization of linear elasticity based on the interface orientation distribution - a complement to the self-consistent approach
Kalisch, Jan; Glüge, Rainer
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 126.2015, S. 398-416
Begutachteter Zeitschriftenartikel
Glide mechanisms for bundle- and plate-like structures
Glüge, Rainer
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., 1980, Bd. 35.2015, 1, S. 62-69
Lehrbuch
Solid mechanics - theory, modeling, and problems
Bertram, Albrecht; Glüge, Rainer
In: Cham: Springer, 2015, Online-Ressource
Lehrbuch
Solid Mechanics - Theory, Modeling, and Problems
Bertram, Albrecht; Glüge, Rainer
In: Cham: Springer, 2015, Online-Ressource (XIII, 318 p. 87 illus., 1 illus. in color, online resource) - (SpringerLink; Bücher; Springer eBook Collection; Engineering), ISBN: 978-3-319-19566-7
2014
Buchbeitrag
Constitutive models for creep-damage behavior at quasi-static and cyclic loading
Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin
In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity '14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08
Begutachteter Zeitschriftenartikel
Homogenisation approach in analysis of creep behaviour in multipass weld
Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm
In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53
Begutachteter Zeitschriftenartikel
A layer-wise theory for laminated glass and photovoltaic panels
Naumenko, Konstantin; Eremeyev, Victor A.
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 112.2014, S. 283-291
Begutachteter Zeitschriftenartikel
A phase mixture model for anisotropic creep of forged AlCuMgSi alloy
Naumenko, Konstantin; Gariboldi, Elisabetta
In: Materials science and engineering / A. - Amsterdam : Elsevier, Bd. 618.2014, S. 368-376
Begutachteter Zeitschriftenartikel
Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff
Altenbach, Holm; Beschetnikov, Dmitriy A.; Lvov, Gennadiy I.; Naumenko, Konstantin; Sukiasov, Vladimir G.
In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67
Begutachteter Zeitschriftenartikel
A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading
Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428
Begutachteter Zeitschriftenartikel
The effective stiffness and stress concentrations of a multi-layer laminate
Glüge, Rainer; Kalisch, Jan
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 111.2014, S. 580-586
2013
Abstract
Analysis of laminates for photovoltaic appliacations
Naumenko, Konstantin; Weps, Matthias; Eremeyev, Victor; Altenbach, Holm
In: 8th German-Greek-Polish Symposium on recent advances in mechanics. - Univ. of Bremen, S. 59-60, 2013Kongress: German-Greek-Polish Symposium on recent advances mechanics; 8 (Goslar) : 2013.09.09-13
Abstract
A material model for describing the anomalous ratcheting effect of advanced chromium steels
Kutschke, Andreas; Naumenko, Konstantin; Altenbach, Holm
In: CanCNSM 2013. - Montréal, insges. 2 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Buchbeitrag
Robust methods for creep fatigue analysis of power plant components under cyclic transient thermal loading
Kostenko, Yevgen; Almstedt, Henning; Naumenko, Konstantin; Linn, Stefan; Scholz, Alfred
In: Proceedings of the ASME Turbo Expo 2013, Volume 5B: Oil and gas applications; steam turbines . - New York, N.Y : ASME, insges. 8 S.
Buchbeitrag
Ein robuster Ansatz zur Simulation des kontinuierlich angetriebenen Rotationsreibschweißprozesses
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 9 S., 2013Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26
Buchbeitrag
Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang
In: Effizienz, Präzision, Qualität - 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU: 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU - Magdeburg: Univ., 2013, Paper B2-5, insgesamt 10 S.Kongress: Magdeburger Maschinenbau-Tage 11 (Magdeburg : 2013.09.25-26)
Begutachteter Zeitschriftenartikel
A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: Computer methods in applied mechanics and engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 265.2013, S. 186-194
Begutachteter Zeitschriftenartikel
Modeling creep damage of an aluminumsilicon eutectic alloy
Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin
In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, Bd. 22.2013, 5, S. 683-698
Begutachteter Zeitschriftenartikel
Unsymmetric three-layer laminate with soft core for photovoltaic modules
Weps, Matthias; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339
Begutachteter Zeitschriftenartikel
Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen
Eisenträger, Joahanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80
Begutachteter Zeitschriftenartikel
Micro-macro analysis of creep and damage behavior of multi-pass welds
Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm
In: Problemy mašinostroenija. - Kiev : Izd. "Naukova Dumka", Bd. 16.2013, 1, S. 31-38
Artikel in Kongressband
Surface layer effects in polycrystalline structures under cyclic viscoplasticity
Prygorniev, Oleksandr; Naumenko, Konstantin
In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Artikel in Kongressband
A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers
Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola
In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Artikel in Kongressband
A holistic approach on the simulation of rotary-friction-welding
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: The 7th Asia-Pacific International IIW Congress. - Singapore, insges. 6 S., 2013Kongress: Asia-Pacific International IIW Congress on Recent Development in Welding and Joining Technologies; 7 (Singapore) : 2013.07.08-10[vollständiger Beitrag auf CD-ROM]
Begutachteter Zeitschriftenartikel
Numerical properties of spherical and cubical representative volume elements with different boundary conditions
Glüge, Rainer; Weber, Martin
In: Technische Mechanik : wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik. - Magdeburg : Inst, Bd. 33.2013, 2, S. 97-103
Begutachteter Zeitschriftenartikel
Generalized boundary conditions on representative volume elements and their use in determining the effective material properties
Glüge, Rainer
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science, Bd. 79.2013, S. 408-416
Begutachteter Zeitschriftenartikel
Biomechanic approach of a growing tumor
Ramírez-Torres, Ariel; Rodríguez-Ramos, Reinaldo; Glüge, Rainer; Bravo-Castillero, Julián; Guinovart-Díaz, Raúl; Rodríguez-Sanchez, Rocío
In: Mechanics research communications. - New York, NY [u.a.] : Pergamon Press, Bd. 51.2013, S. 32-38
Lehrbuch
Festkörpermechanik
Bertram, Albrecht; Glüge, Rainer
In: 2013, Online-Ressource (2,56 MB, 295 S.)
2012
Buchbeitrag
Modeling creep ratcheting of an aluminum-silicon eutectic alloy
Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin
In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31
Buchbeitrag
Creep fatigue analysis of power plant components under transient thermal loading
Kutschke, Andreas; Linn, Stefan; Naumenko, Konstantin; Scholz, Alfred
In: Creep and fracture of engineering materials and structures. - the Japan Inst. of Metals, insges. 4 S., 2012Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11); 12 (Kyoto, Japan) : 2012.05.27-31
Buchbeitrag
Creep deformation characteristics of Al-rich Ti-Al alloys
Sturm, Daniel; Heilmaier, Martin; Naumenko, Konstantin; Kozhar, Sergii; Krüger, Manja
In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012 . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)
Originalartikel in begutachteter internationaler Zeitschrift
Analysis of laminated glass beams for photovoltaic applications
Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Altenbach, Holm
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036
2011
Originalartikel in begutachteter internationaler Zeitschrift
Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature
Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas
In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208
Originalartikel in begutachteter internationaler Zeitschrift
Multi-axial thermo-mechanical analysis of power plant components from 9–12% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering Fracture Mechanics
Originalartikel in begutachteter internationaler Zeitschrift
Multi-axial thermo-mechanical analysis of power plant components from 9-12% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Originalartikel in begutachteter internationaler Zeitschrift
Multi-axial thermo-mechanical analysis of power plant components from 912% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Originalartikel in begutachteter internationaler Zeitschrift
A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature
Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas
In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597
Originalartikel in begutachteter internationaler Zeitschrift
Conservation laws and prediction methods for stress concentration fields
Altenbach, Holm; Eremeyev, Victor A.; Kutschke, Andreas; Naumenko, Konstantin
In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355
Originalartikel in begutachteter zeitschriftenartiger Reihe
A variationally consistent derivation of microcontinuum theories
Meenen, Johannes; Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)
Originalartikel in begutachteter zeitschriftenartiger Reihe
Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Girchenko, Anna; Altenbach, Holm
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)
Originalartikel in begutachteter internationaler Zeitschrift
A pseudoelastic model for deformation twinning - numerical homogenisation and comparison to experiments
Glüge, Rainer
In: The International journal of structural changes in solids. - Austin, Tex : Texas Digital Library, Bd. 3.2011, 1, S. 29-47
2010
Konferenz/Aufsatz
Stress range dependent creep and damage - experimentel observations and their phenomenological description
Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin
In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 55-57
Konferenz/Aufsatz
Modelling of low cycle fatigue for an aluminum alloy at elevated temperature
Altenbach, Holm; Naumenko, Konstantin; Kozhar, Sergii
In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 22-24
Buchbeitrag
On the representative volume element method
Glüge, Rainer
In: 6. Conferencia Científica Internacional de Ingeniería Mecánica, COMEC 2010. - Editorial FreijóoKongress: COMEC 2010; 6 (Santa Clara, Cuba) : 2010.11.02-06
Originalartikel in begutachteter internationaler Zeitschrift
On the elastic energy invariance of crystal twins
Glüge, Rainer
In: Archives of mechanics. - Warszawa : IPPT PAN, Bd. 62.2010, 6, S. 441-464
Originalartikel in begutachteter internationaler Zeitschrift
A pseudoelastic model for mechanical twinning on the microscale
Glüge, Rainer; Bertram, Albrecht; Böhlke, Thomas; Specht, Eckehard
In: Zeitschrift für angewandte Mathematik und Mechanik - ZAMM: ZAMM - Weinheim: Wiley-VCH, 1921, Bd. 90.2010, 7/8, S. 565-594
Originalartikel in begutachteter nationaler Zeitschrift
Bandwidth reduction on sparse matrices by introducing new variables
Glüge, Rainer
In: Ingeniare. - Arica : Universidad de Tarapaca, Bd. 18.2010, 3, S. 395-400
Originalartikel in begutachteter zeitschriftenartiger Reihe
Microscale modelling of deformation twinning
Glüge, Rainer; Bertram, Albrecht
In: Proceedings of the Seventh International Conference on Engineering Computational Technology. - Kippen : Civil-Comp Press, 2010 - (Civil-Comp proceedings; 94)Kongress: ECT; 7 (Valencia) : 2010.09.14-17
2009
Artikel in Zeitschrift
Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results
Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 45.2009, 3, S. 249-256
Artikel in Zeitschrift
Creep analysis of power plant components from 1% CRMOV and 10% CRMOV steels
Kostenko, Y.; Schwass, G.; Naumenko, Konstantin
In: OMMI. - Leatherhead, Surrey : European Technology Development, Bd. 6.2009, 2, S. 1-10
Artikel in Zeitschrift
Structural analysis of a power plant component using a stress-range-dependent creep-damage constitutive model
Naumenko, Konstantin; Kostenko, Y
In: Materials science & engineering. - Amsterdam [u.a.] : ElsevierMaterials science and engineering / A, Bd. 510/511.2009, S. 169-174
Artikel in Zeitschrift
Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov
Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 45.2009, 3, S. 367-378
Artikel in Zeitschrift
Creep analysis with a stress range dependent constitutive model
Naumenko, Konstantin; Altenbach, Holm; Gorash, Yevgen
In: Archive of applied mechanics. - Berlin : Springer, Bd. 79.2009, S. 619-630
Artikel in Zeitschrift
Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis
Altenbach, Holm; Brigadnov, Igor A.; Naumenko, Konstantin
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 10, S. 823-832
Konferenz/Aufsatz
Creep analysis for a wide stress range based on stress relaxation experiments
Altenbach, Holm; Naumenko, Konstantin; Gorash, Yevgen
In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008. - Singapore [u.a.] : World Scientific, S. 41-46, 2009
Konferenz/Aufsatz
Modeling of stress range dependent creep and damage for the structural analysis
Naumenko, Konstantin; Altenbach, Holm
In: Creep & fracture in high temperature components. - Lancaster, Pa. : DEStech Publ., S. 974-984, 2009
2008
Artikel in Zeitschrift
Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile
Sukiasov, Vladimir; Altenbach, Holm; Naumenko, Konstantin
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 72.2008, S. 183-191
Artikel in Zeitschrift
Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges
Altenbach, Holm; Gorash, Yevgen; Naumenko, Konstantin
In: Acta mechanica. - Wien : Springer, Bd. 195.2008, S. 263-274
Konferenz/Aufsatz
Numerische Zeitstandanalyse einer Kraftwerkskomponente mit einem Kriechschädigungs-Werkstoffmodell
Kostenko, Yevgen; Naumenko, Konstantin
In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. - Düsseldorf : VDEh, S. 37-46, 2008
Monografiebeitrag
Fiber rotation motion in homogeneous flows
Altenbach, Holm; Naumenko, Konstantin; Renner, Barbara
In: Micro-macro-interactions. - Berlin [u.a.] : Springer, S. 133-142, 2008
Buchbeitrag
A lower bound estimation of a twinning stress for Mg by a stress jump analysis at the twin-parent interface
Glüge, Rainer; Kalisch, Jan
In: Micro-macro-interactions . - Berlin [u.a.] : Springer, ISBN 978-3-540-85714-3, S. 93-106
2007
Artikel in Zeitschrift
Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergeii; Renner, Barbara
In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 87 (2007), Heft 2, S. 81-93
Artikel in Zeitschrift
Numerical benchmarks for creep-damage modeling
Altenbach, Holm; Naumenko, Konstantin; Gorash, Yegvgen
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 7 (2007), S. 4040021-4040022
Monografie
Modeling of creep for structural analysis - with 5 tables
Naumenko, Konstantin; Altenbach, Holm
In: New York: Springer, 2007, Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications, XII, 220 S. - (Foundations of engineering mechanics), ISBN: 978-3-540-70834-6 [Literaturverz. S. 199 - 214]
Monografiebeitrag
Long term creep analysis of pipe bends in a steam transfer line at elevated temperature
Altenbach, Holm; Naumenko, Konstantin
In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2 - Stafa-Zürich [u.a.] : Trans Tech Publ. . - 2007, S. 795-802
Originalartikel in begutachteter internationaler Zeitschrift
Micromechanical modeling of twinning
Glüge, Rainer; Böhlke, Thomas
In: Proceedings in applied mathematics and mechanics: PAMM - Weinheim [u.a.]: Wiley-VCH, 2002, Bd. 7.2007, 1, S. 4060039-4060040
Originalartikel in begutachteter internationaler Zeitschrift
Finite element simulation of texture evolution and swift effect in NiAl under torsion
Böhlke, Thomas; Glüge, Rainer; Klöden, Burghardt; Skrotzki, Werner; Bertram, Albrecht
In: Modelling and simulation in materials science and engineering - Bristol: IOP Publ., Bd. 15 (2007), 6, S. 619-637
2006
Artikel in Zeitschrift
Ausrichtung von Partikeln in stationären Strömungsfeldern
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 6 (2006), S. 423-424
Artikel in Zeitschrift
A note on transversely-isotropic invariants
Altenbach, Holm; Naumenko, Konstantin
In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 86 (2006), Heft 2, S. 162-168
Artikel in Zeitschrift
Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen
Radusch, Hans-Joachim; Kies, Torsten; Altenbach, Holm; Naumenko, Konstantin
In: Zeitschrift Kunststofftechnik - München : Hanser, Bd. 2 (2006), Heft 6, S. 1-21
Artikel in Zeitschrift
Steady-state creep analysis of pressurized pipe weldments by perturbation method
Shutov, A. V.; Altenbach, Holm; Naumenko, Konstantin
In: International journal of solids and structures - New York, NY [u.a.] : Elsevier, Bd. 43 (2006), S. 6908-6920
Artikel in Zeitschrift
On the free particle rotation in a polymer melt
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara
In: Strojnícky časopis - Bratislava : [Verlag nicht ermittelbar], Bd. 57 (2006), Heft 2, S. 112-126
Habilitation
Modeling of high-temperature creep for structural analysis applications
Naumenko, Konstantin
In: Halle Univ., FB Ingenieurwiss., Habil.-Schr., 2006, Online-Ressource, Text + Image
Konferenz/Aufsatz
Power plant component design using creep-damage analysis
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of 2006 ASME International Mechanical Engineering Congress & Exposition - New York : ASME, S. 1-10
Konferenz/Aufsatz
Creep modeling and long term structural analysis of plates and shells
Altenbach, Holm; Naumenko, Konstantin
In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity & viscoplasticity, and metal forming ; proceedings of Plasticity '06, the Twelfth International Symposium on Plasticity and its Current Applications - Fulton, Md. : NEAT Press . - 2006, S. 580-582
Originalartikel in begutachteter internationaler Zeitschrift
Texture evolution and swift effect in NiAl
Glüge, Rainer; Böhlke, Thomas; Bertram, Albrecht
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH, Bd. 6.2006, 1, S. 477-478
2005
Artikel in Zeitschrift
Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva
Altenbach, Holm; Naumenko, Konstantin
In: Vestnik Nacional'nogo Techniceskogo Universiteta "ChPI". - Char'kov : Univ., 2005, S. 57-66
Artikel in Zeitschrift
On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics
Altenbach, Holm; Naumenko, Konstantin
In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339
Artikel in Zeitschrift
A phenomenological model for anisotropic creep in a multipass weld metal
Naumenko, Konstantin; Altenbach, Holm
In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819
Artikel in Zeitschrift
Numerical treatment of finite rotation for a cylindrical particle
Renner, Barbara; Altenbach, Holm; Naumenko, Konstantin
In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161
Konferenz/Aufsatz
Modelling of anisotropic creep in a multi-pass weld metal
Altenbach, Holm; Naumenko, Konstantin
In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387
Monografiebeitrag
A direct approach to the formulation of constitutive equations for rods and shells
Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.
In: Shell structures. - London [u.a.] : Taylor & Francis, 2005, S. 87-90
2004
Artikel in Zeitschrift
Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten
Naumenko, Konstantin; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228
Artikel in Zeitschrift
Edge effects in moderately thick plates under creep damage conditions
Altenbach, Johannes; Altenbach, Holm; Naumenko, Konstantin
In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263
Konferenz/Aufsatz
Shell and solid type finite element analysis of creep in thin-walled structures
Naumenko, Konstantin; Altenbach, Holm
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176
Konferenz/Aufsatz
Boundary layer in a moderately thick plates under creep-damage conditions
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of the 2004 International Conference on Computational & Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116
2003
Artikel in Zeitschrift
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov
Altenbach, Holm; Naumenko, Konstantin
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352
Artikel in Zeitschrift
Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung
Altenbach, Holm; Dyogtyev, Oleksandr; Naumenko, Konstantin
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213
Artikel in Zeitschrift
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics
Altenbach, Holm; Naumenko, Konstantin
In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234
Artikel in Zeitschrift
A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions
Altenbach, Holm; Naumenko, Konstantin
In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570
Konferenz/Aufsatz
On the predictions of fiber orientation and elastic properties of injection molded-walled parts
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21
Konferenz/Aufsatz
A micro-polar theory for binary media with application to flow of fiber suspensions
Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.
In: Proceedings of the XXX Summer School "Advanced Problems in Mechanics", APM '2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62